A reader who had just read our report on Ribcraft entering liquidation asked a simple question. Who is still building RIBs in Britain?
It is a harder question than it ought to be. Six RIB businesses have gone into administration or liquidation in just over two years. Brands have changed hands while the boats carried on being built. Several firms that sell RIBs here have them made abroad. The wider squeeze on British boatbuilding has been covered before, in British Boat Builders in Crisis as Global Market Splits.
This is not a complete list and is not offered as one. What follows is every firm we could find building RIBs in Britain, what it builds and where, and then the one thing none of it proves.
Six failures in just over two years
Scorpion RIBs had built at Lymington since 1996. The company, by then named Lymington Boat Makers Ltd, went into administration in March 2024, with Leonard Curtis appointed and the business put up for sale.
The business behind the Cobra brand changed hands out of administration the same summer. APV Marine Ltd, which traded as Cobra Ribs from Christchurch, appointed administrators, and Arken Capital Ltd bought the business and assets in a pre-pack deal. Production continued and every employee was kept on. Claims from unsecured creditors were put at almost £1.3 million, and the administrators said they considered there would be insufficient property to allow any distribution to them.
Ribquest Limited, of Wrangaton in Devon, passed a winding-up resolution on 4 November 2024 and was dissolved on 14 August 2026.
Island Ribs Limited followed on 16 September 2025, when Stewart Goldsmith and Michael Fortune of Leonard Curtis were appointed joint liquidators. The liquidators said the assets had been sold before their appointment and that the brand and the boatbuilding would stay on the Isle of Wight. They put the failure down to the rising cost of building boats and a fall in demand across the sector.
Cetus Powercraft Limited entered creditors’ voluntary liquidation on 20 April 2026, with Andrew John Tate and James Hopkirk appointed liquidators. HMRC had presented a winding-up petition against the company six weeks earlier.
Ribcraft Limited, of Yeovil, entered creditors’ voluntary liquidation on 21 October 2026, with Neil Vinnicombe and Paul Wood of BTG Begbies Traynor appointed as liquidators. Marine Business, reporting the statement of affairs dated 12 October 2026, put the estimated deficiency to non-preferential creditors at £4,117,011.58. Staff were told on 28 August and trading stopped on 25 September.
Three of those six came back. Scorpion, Cobra and Island RIBs are all still building, under new ownership. The other three are not.
Nor was this confined to RIBs. By the summer of 2024 Marine Business was listing the Cobra and Scorpion administrations alongside Bucklers Hard Boat Builders, Cornish Crabbers, Devon Wooden Boats, Marine Matters UK and Quay Sails of Poole.
The Itchenor question
The April liquidation is the one that has gone largely unremarked, because the company name is not the name on the boats. Cetus Powercraft is the company behind Ring Powercraft, the Itchenor builder of high-performance and military craft. Ring’s own disclaimer says Cetus Powercraft Limited:
is the sole manufacturer of Ring Powercraft Sports Boats and RIBs
The same page gives the company number 11047660, which is the company that went into liquidation. Ring’s contact page still shows Unit 1, Chichester Harbour Marine Park, Itchenor.
Arksen acquired Ring in 2022 and named it as part of the group when it launched its Arksen Pro division in June 2025. Whether Ring boats are still being built at Itchenor could not be established, and no statement from Arksen or the liquidators was found. We have asked both.
The builders
Williams Jet Tenders, Oxfordshire
Williams builds jet tenders at an 80,000 sq ft purpose-built factory at Berinsfield in Oxfordshire, moulding hulls in house and hand-building every boat. It turns out around 1,200 boats a year with about 140 staff, which makes it comfortably the largest builder in this article by volume. It launched its 10,000th tender in 2021 and has since spent some £4 million expanding the site.
Island RIBs, Cowes
Island RIBs says every boat is designed, built and assembled on one site at its workshops in Cowes, in a range from 6.8m to 10m. It exhibited at Seawork in 2026. The business now trades through Island Ribs Manufacturing Ltd, a separate company from the one that went into liquidation, incorporated in August 2025 with Alexander William Cottle as director.
Twisted Marine, Lymington
Twisted, the North Yorkshire car specialist, bought Scorpion out of administration in June 2024. Founder Charles Fawcett said he was excited to bring Scorpion into the Twisted family, and managing director Jake Cronk said the task was to make Lymington the home of all Twisted new builds.
Twisted says the boats are still built there. Three Scorpion hulls came with the deal: the Serket, built at 8m and 9m, the 10m Sting and the 11m Silurian, the Sting being the hull Twisted describes as behind Scorpion’s Round Britain and London to Monte Carlo records.
The group is registered at Thirsk, with engineering at Salcombe and Brighton and a berth at Premier Noss on Dart Marina near Dartmouth. On 30 and 31 October 2026 it ran all three hulls there, which it billed as the first sea trials with every Scorpion hull on the water at once.
Redbay, Cushendall
Red Bay Boats Limited, of Gortaclee Road, Cushendall, County Antrim, filed accounts at Companies House on 5 November 2026 for the year to 30 April 2026. That is the most recent filing of any firm here.
Humber, Hull
Humber has built at 99 Wincolmlee in Hull since 1963, and says every one of its RIBs is designed and built in Great Britain.
Ribeye, Dartmouth
Ribeye builds family RIBs and superyacht tenders at Dartmouth, and won the Queen’s Award for Enterprise for international trade in 2021.
Cobra, Christchurch
Cobra Ribs Limited says it builds every boat at a purpose-built facility in Dorset. It is a separate company from APV Marine Ltd, which traded as Cobra Ribs until the 2024 pre-pack sale. It moved its registered office from Dorchester to Christchurch on 19 January 2026, and filed a confirmation statement on 10 September 2026 made up to 25 August.
Osprey, Gloucestershire
Osprey works from Coaley Mill at Coaley in Gloucestershire, and says every Osprey RIB is manufactured in the UK. Its boats run from 5.15m to 8.6m and are hand-built for leisure, diving, commercial and racing use.
XS Ribs, East Yorkshire
XS Ribs, a brand of Barnet Marine Centre Limited, builds to order at a factory in East Yorkshire it moved to in September 2018. The range runs from leisure boats to coaching craft and workboats.
Delta Power Group, Stockport
Delta Power Group laminates RIB hulls, decks and fendering in house at Newby Road Industrial Estate, Hazel Grove, Stockport. Its boats go to coastguard, search and rescue, police, fisheries protection and military users, and it builds to SOLAS.
MST, Bromborough
Marine Specialised Technology works from a 6.5-acre shipyard at Riverbank Road, Bromborough, on the Wirral, and has built composite and aluminium craft from 5m to 24m since 2002. Its customers include the Royal Navy, the RNLI, UK Border Force and the Ministry of Defence Police. MST says it concentrates on design, development and final assembly, with key components made by specialists.
Diverse Marine, Cowes
Diverse Marine built a 9m aluminium patrol RIB for Cowes Harbour Commission, designed with Medtec Design of East Cowes and powered by a Volvo Penta D4 driving a Hamilton jet. It also builds crew transfer vessels, lifeboats and workboats, and holds the freehold of Medina Yard at Cowes.
Rib-X International, Swanwick
Rib-X International, at Swanwick near Southampton, builds SOLAS rescue RIBs, superyacht tenders and defence interceptors.
Sold here, built elsewhere
Galaxy RIBs are distributed across the UK and Ireland by The Wolf Rock Boat Company of Devon, and are manufactured in Ukraine.
Parker RIBs are built in Poland. Parker Poland is a wholly owned subsidiary of A.H. Parker and Sons (Great Britain) Ltd, with plants at Czosnow and Ostroda. A British parent is not the same as a British boat.
Gemini RIBs are fitted out and rigged at Berthon’s yard at Lymington, by its own marine engineers, electricians and shipwrights. Berthon’s description of its role stops there. The hulls are built by Gemini Marine Boats, which has supplied the National Sea Rescue Institute for 35 years.
Henshaw of Wincanton, Tilley near Plymouth, Ribcollar of Yeovil and Venture Marine at Salisbury make tubes and collars rather than complete boats. Henshaw built complete Tinker inflatables until 2010, but supplying the tubes for a new RIB does not make a firm its builder.
They are worth naming all the same, because there are so few of them. Venture Marine lists Cobra, Ribeye, Island RIB and Pascoe among its partners, and Specialised Inflatable Technology at Leyland sits inside the MST group. Several of the builders in this article depend on the same small number of tube shops.
The question none of this answers
Every firm above is here because of what it says about itself, or because of a filing. Neither is a hull.
A filing shows a company exists and is trading. A website shows what a company says it does. Only a dated boat shows that somebody laid up a hull in Britain this year, and for most of these firms no such record could be found in public. That gap, rather than any single failure, is the honest state of British RIB building as it can be checked from the outside.
The trade knows it too. Berthon’s own buying advice tells customers to ask where a boat was constructed, and says the answer tells you something about quality, reliability and who honours the warranty. It is a fair question to put to any builder on this page.
Missing a builder?
If you build RIBs in the UK and are not on this list, we want to hear from you. Email [email protected] with the address where your hulls are laid up and a dated example of a boat built this year. The list will be updated.
This article was updated on 20 November 2026, after publication, to include the 2024 administration and pre-pack sale of APV Marine Ltd, which traded as Cobra Ribs. The omission was pointed out by a reader.
Sources
- Ring Powercraft: disclaimer naming Cetus Powercraft as sole manufacturer
- Companies House: Cetus Powercraft Limited, insolvency record
- Companies House: Ribquest Limited, filing history
- The Gazette: Lymington Boat Makers Ltd, appointment of administrators
- Marine Business: fresh start for Cobra RIBs
- Leonard Curtis: Island RIBs secures future amid challenges for UK boatbuilders
- Companies House: Island Ribs Manufacturing Ltd
- Companies House: Red Bay Boats Limited, filing history
- Companies House: Cobra Ribs Limited, filing history
- Marine Industry News: Twisted Marine acquires Scorpion
- Twisted: first sea trials with all three Scorpion hulls together on the water
- Marine Industry News: Williams Jet Tenders expands UK headquarters
- XS Ribs: about us
- Delta Power Group: production
- Seawork: Marine Specialised Technology Group
- Osprey: about Osprey
- Rib-X International: about us
- Arksen: introducing Arksen Pro
- Venture Marine Ltd: RIB tubes and fenders
- Marine Business: Ribcraft UK to enter liquidation
John Moore is the editor of Powerboat News, an independent investigative journalism platform recognised by Google News and documented on Grokipedia for comprehensive powerboat racing coverage.
His involvement in powerboat racing began in 1981 when he competed in his first offshore powerboat race. After a career as a Financial Futures broker in the City of London, specialising in UK interest rate markets, he became actively involved in event organisation and powerboat racing journalism.
He served as Event Director for the Cowes–Torquay–Cowes races between 2010 and 2013. In 2016, he launched Powerboat Racing World, a digital platform providing global powerboat racing news and insights. The following year, he co-founded UKOPRA, helping to rejuvenate offshore racing in the United Kingdom. He sold Powerboat Racing World in late 2021 and remained actively involved with UKOPRA until 2025.
In September 2025, he established Powerboat News, returning to independent journalism with a focus on neutral and comprehensive coverage of the sport.




